Leak out of back of gun

[jguinan2]

Hey guys

My a1 is having some issues again. I recently replaced my lpr and ram to fight a leaking problem I've been having. I replaced the ram first an that solved it. Soon after I got a leak from the trigger area of the frame. I replaced the lpr and that fixed that BUT NOW I'm getting a leak from the back of my gun. Now to elaborate on that. The spot is from where the bottom ofthe solenoid is ( if looke at from the back it would be the little square cut from the solenoid tray). The gun fires but on one instance the ram stayed stuck forword. The leak is not to large but very noticable.

My thought is it's the noid leaking a little and I need to swap it out.

Anyone got anything?

[Kr33peR]

I would start by checking the gasket under the noid. did the leak start right after you replaced the LPR? if so make sure you have the noid/gasket installed properly.

[jguinan2]

it had been like a problem that occured at the same time. Ive checked the leak diagnosis repeatedly but im just trying to see if you guys concur from the info ive given. Im taking it tomorrow to be checked again hopefully theres a solenoid at the store so we can see if it is that.

[Winnebago]

i would look at the noid gasket first. lube it up nice with grease. make sure you put it in the right way.

did you crank the noid screw down too much?

did you install your lpr springs in the right order? what is your lpr pressure and hpr pressure?

[dr.strangelove]

Your solenoid is probably fine. Don't jump the gun and start buying massively expensive parts until you're sure you need them. Gasket is most likely the problem, over-tightening the set screw is next most likely. Over-tightened screw seems even more likely when you consider it is leaking AND sticking.

[jguinan2]

im at 260 and 58 right now and yeah im gana go take it right now to get checked out. ill update when i get back